DMTA-10084-01EN, Rev. 2, November 2018
Data Logger
121
Figure 9-16 Delete dialog box
9.4.3.4 Clear
The Clear button is used to delete all of the data from a saved file, but it does not
delete the file from the instrument.
To clear a file of data
1. Press the Tab key to select the Clear button.
2. Press the Enter key.
The Clear dialog box appears (see Figure 9-17 on page 121).
3. Follow the instructions in the dialog box to confirm or cancel the delete.
Figure 9-17 Clear dialog box
9.4.3.5 Selecting a File ID
See “Recalling a File ID” on page 113.
Calibration (CAL) files only contain a single ID.
To Next Page
Loading...
