Olympus EPOCH 6LT - Figure 9-28 Video Sidebar Submenu; Recording and Saving Video

DMTA-10084-01EN, Rev. 2, November 2018
Chapter 9 136
To activate the video recorder
1. In the setup menu, turn the adjustment knob to highlight the Tools icon ( ),
and then press Enter to open the Tools submenu.
2. Turn the adjustment knob to highlight the Video icon ( ).
3. Press the Enter key to open the Video dialog box, and then press the Enter key
again to highlight the Video parameter.
4. Turn the adjustment knob to set the parameter value to On.
5. Press the Shift, Tab key sequence to open the Video sidebar submenu (see
Figure 9-28 on page 136).
Figure 9-28 Video sidebar submenu
9.6.2 Recording and Saving Video
Using the video recorder includes recording, saving, and clearing video files from
memory.