Olympus EPOCH 6LT - 10.2 Adding a Wireless LAN (Wi-Fi) Network; Figure 10-4 Wi-Fi Connection Status Page

DMTA-10084-01EN, Rev. 2, November 2018
Wi-Fi Networks 149
Figure 10-4 Wi-Fi connection status page
10.2 Adding a Wireless LAN (Wi-Fi) Network
If a wireless LAN (Wi-Fi) network that you want to connect to is not listed in the
networks list on the Wi-Fi Networks setup page. You can manually enter the
necessary information to connect to that network.
To add a wireless LAN (Wi-Fi) network
1. In the Wi-Fi Networks setup page, highlight the Add Network button.
2. Press the Enter key to open the Add Network setup page (see Figure 10-5 on
page 150).
3. Press the Enter key to select the Security parameter, and then turn the adjustment
knob to select a security type.
4. Press the Tab key to select the Network Name (SSID) parameter and display the
virtual keypad.
5. Enter the network SSID (see “Using the Virtual Keypad” on page 35).
6. Press the Tab key to move to the Password box.