DMTA-10084-01EN, Rev. 2, November 2018
Chapter 6
62
Figure 6-2 Scanning gain buttons
7. Turn the adjustment knob to highlight a button, and then press the Enter key to
execute the function.
6.2 Selecting and Adjusting the Pulser
The pulser settings in the EPOCH 6LT are available in the Pulser dialog box.
To select the pulser
1. In the setup menu, turn the adjustment knob to navigate to the Pulser (). See
“Setup Mode” on page 17 for details on using the setup menu and dialog boxes.
2. Press the Enter key to display the pulser dialog box (see Figure 6-3 on page 63).
To Next Page
Loading...
