DMTA-10084-01EN, Rev. 2, November 2018
Software Features and Options
159
Figure 11-5 Second DAC point
6. Turn the adjustment knob to move the gate trigger indicator to the next echo.
7. Press the Tab key to highlight AUTO 80%, and then press the Enter key to bring
the selected point to 80 % full-screen height.
8. Press the Tab key to highlight the Add button, and then press the Enter key to add
another point (see Figure 11-5 on page 159).
9. Repeat steps 6, 7, and 8 until you are finished building your curve (see Figure 11-6
on page 160).
To Next Page
Loading...
