Olympus EPOCH 6LT - Figure 10-1 Wi-Fi Networks Setup Page

DMTA-10084-01EN, Rev. 2, November 2018
Chapter 10 146
a) Press the Tab key to select the Enable parameter.
b) Turn the adjustment knob to set the Enable parameter to On.
c) Press the Tab key to move to the list of available networks.
2. Turn the adjustment knob to select a network, and then press the Enter key to
confirm your selection.
Figure 10-1 Wi-Fi Networks setup page
a) If the network you select requires a password, the log on page for that
network is displayed (see Figure 10-2 on page 147):
(1) Select and fill in the Password box, and then highlight Connect.
(2) Press the Enter key to make the connection.