DMTA-10084-01EN, Rev. 2, November 2018
Data Logger
133
Figure 9-26 Grid view on the live A-scan display
To use the arrow buttons
1. Press the Tab key to move the selection from one arrow button to the next.
2. On the selected arrow button, press the Enter key to execute the desired function
as described below.
The selected cell is highlighted with a black background.
— The Left Arrow ( ) button moves the selection to the cell on the left of
the currently selected cell and changes the active file ID to that of the newly
selected cell.
— The Right Arrow ( ) button moves the selection to the cell on the right
of the currently selected cell and changes the active file ID to that of the newly
selected cell.
To Next Page
Loading...
