DMTA-10084-01EN, Rev. 2, November 2018
Setup Pages
53
The available parameter selections are as follows:
— Year
Sets the year.
—Month
Sets the month.
—Day
Sets the day of the month.
—Mode
Sets the hour display mode (12 Hour or 24 Hour).
—Hour
Sets the hour.
—Minute
Sets the minutes.
—Time Zone
Sets the time zone.
— Automatic Date & Time
Automatically sets the date and time when connected to a wireless LAN
(Wi-Fi) network.
○ On
○ Off
—Daylight Saving Time
Sets daylight saving time.
○ On
○ Off
5.4.7 Resets Setup Page
This page is used to reset certain system parameters to the factory default condition
(see Figure 5-13 on page 54). A warning is displayed to notify you that the data
associated with the selection will be reset (erased).
To open the Resets setup page
Select the Reset icon ( ) to open the Resets setup page (see Figure 5-13 on
page 54).
To Next Page
Loading...
