DMTA-10084-01EN, Rev. 2, November 2018
Chapter 9
114
Calibration (CAL) files only contain a single ID.
To recall a file ID from the Contents page
1. With the Contents setup page displayed, turn the adjustment knob to highlight
the Recall button.
2. Press the Enter key to bring the saved data to the live A-scan display (see
Figure 9-10 on page 114).
The file name and ID of the file being viewed is displayed in the file identifier bar.
The notification “<filename> recalled, press any key to continue” is displayed in
the message bar.
3. Press any key on the instrument to continue.
Figure 9-10 Recalled file data
To Next Page
Loading...
