DMTA-10084-01EN, Rev. 2, November 2018
Chapter 5
40
Figure 5-6 G1Start selected as Home location
To change the Home location
1. Open the User Keys and Home Keys setup page (see Figure 5-5 on page 39).
2. Press the Tab key to select the dialog box containing the following parameters:
— Home
— Gain
— Auto XX%
— Save
— Freeze
— G1Start
— Snap Shot
3. Turn the adjustment knob to select one of the parameters.
4. Press the Tab key to highlight Set, and then press the Enter key to confirm.
To Next Page
Loading...
