Olympus EPOCH 6LT - Figure 9-11 Details Setup Page

DMTA-10084-01EN, Rev. 2, November 2018
Chapter 9 116
Figure 9-11 Details setup page
9.4.2.6 Viewing a Summary of All Saved Data
After you have completed saving data to a file, you may want to view a summary of
the different measurements saved in the different IDs within the file.
To view a summary of all saved data in a file
1. In the File setup page, turn the adjustment knob, and then press the Enter key to
select the file that you want to view.
2. Press the Tab key to select the Summary button.
3. Press the Enter key to view the file summary (see Figure 9-12 on page 117).
4. Use the First Page, Prev Page, Next Page, and Last Page buttons to navigate
through a large summary file.