Olympus EPOCH 6LT - Table 4 Flag Descriptions

DMTA-10084-01EN, Rev. 2, November 2018
Flags 207
Appendix: Flags
Table 4 on page 207 provides a description of the possible flags.
Table 4 Flag descriptions
Flag Description
Length units are inches.
Length units are millimeters.
Length units are microseconds.
Indicates that the Shift (2
ND
Function) key has been pressed.
Gate 1 is in peak measurement mode.
Gate 2 is in peak measurement mode.
Gate 1 is in edge (or flank) measurement mode.
Gate 2 is in edge (or flank) measurement mode.