DMTA-10084-01EN, Rev. 2, November 2018
Flags
209
Peak Hold reference echo is active.
Indicates that a USB flash drive is installed.
A wireless LAN (Wi-Fi) network is connected.
Wireless LAN (Wi-Fi) network connection error.
Indicates that video record mode is actively acquiring a video.
Indicates that the gated signal occurs within Leg 1 during an angle
beam inspection.
Indicates that the gated signal occurs within Leg 2 during an angle
beam inspection.
Indicates that the gated signal occurs within Leg 3 during an angle
beam inspection.
Indicates that the gated signal occurs beyond Leg 3 during an
angle beam inspection.
Current settings are restricting the waveform update rate below
60 Hz.
Indicates that the charger is connected and charging the battery.
Indicates that the instrument is running on battery power.
Table 4 Flag descriptions (continued)
Flag Description
To Next Page
Loading...
