Oracle X7-2 - Page 154

Remove the Disk Backplane
6.
Using a Torx T10 screwdriver, loosen the three captive screws that secure the
disk backplane to the chassis [4].
7.
Lift the backplane up and tilt it toward the rear of the server to free it from the
hooks and right-side metal bracket, and lift it out of the server [5].
8.
Place the disk backplane on an antistatic mat.
Related Information
■
“Install the Disk Backplane” on page 155
154 Oracle Server X7-2 Service Manual • October 2017