Oracle X7-2 Service Manual

Remove the NVMe Cable Assembly
b.
Lift the mid-wall from the server chassis and set it aside.
4.
Disconnect each NVMe cable from the disk backplane by pressing the latch on
the cable connector and then pulling out the connector [3].
5.
Disconnect the NVMe cables from the motherboard NVMe connectors [3].
Servicing the NVMe Cables 187

Oracle X7-2 Specifications

General

Processor	Intel Xeon Scalable processors
Number of Processors	1 or 2
Memory	Up to 1.5 TB DDR4
Memory Slots	24 DIMM slots
Form Factor	2U Rackmount
Storage Bays	8 x 2.5-inch
CPU Socket	Socket P (LGA 3647)
Power Supply	Redundant hot-swappable power supplies