6.5 Tool Operation Function of CMI
6-25
• If a recoverable error occurs in FP7 MC Unit, click the [Clear errors] button
to clear the error.
• If a warning occurs in FP7 MC Unit, click [Clear warning] to clear the
warning of FP7 MC Unit.
• The control method for the table number that the teaching operation was
performed is automatically changed to “Absolute”.
• The result of the teaching becomes effective once the tool operation quits
and the setting data is downloaded to FP7 MC Unit.
• This dialog box cannot be closed during the operation.
To Next Page
Loading...
