CMTimeChart Monitor
14-10
14.3.4 Trigger Condition Setting (Trigger Condition)
"Trigger condition", "Trigger A" and "Trigger B" in the Trigger condition setting dialog box are
set as follows.
Setting item
Trigger condition
Select a condition for the corresponding trigger number.
A It will be valid when the condition specified for Trigger A is met.
B It will be valid when the condition specified for Trigger B is met.
A and B It will be valid when the both conditions specified for Trigger A
and Trigger B are met.
A or B It will be valid when the condition specified for Trigger A or
Trigger B is met.
Trigger A
Click [Set] button to open the "Trigger Setting" dialog box.
Trigger B
To Next Page
Loading...
