Panasonic AFP7MC16EC

16.10 Unit Memories (Cam Pattern Editing Area)
16-85
16.10.2 Cam Pattern Setting Area
●: Available, -: Not available
Axis no.
Unit
memory
no. (Hex)
Name Default Description R W
- UM 66F40
Cam pattern
no.
U0
When reading: Set a cam pattern number to be
read out.
When rewriting: Set a cam pattern number to be
written.
bit
Pattern
resolution
Description
Axis 16 Axis 32 Axis 64
15-0
1024,2048,
4096,8192
1 to 64
1 to
128
1 to
256
16384 1 to 32 1 to 64
1 to
128
32768 1 to 16 1 to 32 1 to 64
Any other settings will be errors.
 
- UM 66F41
Reserved for
system
- - - -
- UM 66F42
No. of cam
pattern
setting
sections
U0
When reading, stores the number of setting
sections of the read cam pattern table.
When rewriting, the cam curve number of the
rewritten cam pattern table is set.
bit Name Description
15-0
No. of cam
pattern
setting
sections
Setting range: 1 to 20 (sections)
Any other settings will be errors.
 
- UM 66F43 Shift amount U0
When reading, the shift amount of the read cam
pattern table is stored.
When rewriting, the shift amount of the rewritten
cam pattern table is stored.
bit Name Description
15-0
Shift
amount
Range: 0 to 100.00 (%)
Any other settings will be errors.
 