Settings of FP7 MC Unit
Using CMI Tool
5-20
5.5.2 Comparison of Parameter Information
The following items can be verified using CMI.
• Verifying the data being edited with saved cmi files
• Verifying the data being edited with the unit memory (RAM) data in FP7 MC Unit
The following procedure is explained on the condition that CMI has already started.
1. Select "Debug" > "Verify" > "File" or "Unit" from the menu bar.
When "File" is selected, the "Select verification file" dialog box is displayed.
When "Unit" is selected, the "Verify - Unit" dialog box is displayed.
2. Select a target (file or unit) to be verified, and press the [OK] button.
The verification result is displayed.
(In normal state) (In abnormal state)
3. Press the [Close] button.
The screen returns to the editing screen of CMI.
• When selecting "Unit" for the verification target, the contents of the unit
memories (RAM) in FP7 MC Unit are verified. The contents of the FROM in
FP7 MC Unit may not match the contents of the unit memories (RAM).
To Next Page
Loading...
