Stop Functions
12-8
12.2.2 Axis Parameter
The time of a stop operation is specified in the axis parameter setting menu.
Specify the items in "Parameter" > "Stop function setting" > "Axis parameter settings" of CMI.
Item Default Description
Emergency stop
deceleration time
100 ms Set the deceleration time at the time of emergency stop. 0 to 10000 ms
Limit stop
deceleration time
100 ms Set the deceleration time at the time of limit stop. 0 to 10000 ms
Error stop
deceleration time
100 ms Set the deceleration time at the time of error stop. 0 to 10000 ms
To Next Page
Loading...
