Panasonic AFP7MC16EC

1.3 System Configuration
1-7
1.3.2 Type of Software
The following three software are used for using the system combining FP7 MC Unit and Servo
Amplifier A6B/A5B.
 Control Motion Integrator
Application:
This software is used for setting parameters of
FP7 MC Unit, monitoring the state and test
operations.
 Setting of EtherCAT communication
parameters
 Setting of Positioning Parameters
 Setting of positioning tables, etc.
Download destination:
FP7 MC Unit
Connection with the Unit:
Connect to the USB port of FP7 CPU Unit
 Control FPWIN GR7
Application:
This software is used for configuring the whole
FP7 system and creating user programs.
Download destination:
FP7 CPU Unit
Connection with the Unit:
Connect to the USB port of FP7 CPU Unit
 PANATERM
Application:
This software is used for setting parameters
and monitoring the states of Servo Amplifier
A6B/A5B series.
Download destination:
Servo amplifier A6B/A5B
Connection with the Unit:
Connect to the USB port of Servo Amplifier
A6B/A5B.