Data Transfer to MC Unit and Test Operation
6-14
6.5.2 Serve ON/OFF with Tool Operation Function
The following procedure is explained on the condition that CMI has already started.
PROCEDURE
1. Select "Online" > "Tool Operation" from the menu bar.
The "Tool operation" dialog box is displayed.
2. Select "Servo ON/OFF" in the "Tool operation" dialog box.
The "Servo ON/OFF" dialog box is displayed.
3. Select a desired axis, and press the [Change ON/OFF] button.
The state is switched between servo lock and servo free.
4. Confirm the servo ON/OFF states of arbitrary axes, and press the "Exit"
button.
This returns to the "Tool operation" dialog box.
To Next Page
Loading...
