14.7 Storage of CMTimeChart Data
14-25
14.7 Storage of CMTimeChart Data
Conditions and data set in "CMTimeChart" can be stored as files. Store them after uploading
data. The following procedure is explained on the condition that the logging is complete and
"CMTimeChart" has already started on CMI.
1. Select “File” > “Save As” from the menu bar.
2. Enter the desired file name and press [Save].
It can be stored as a file with the extension (.cmt).
• By opening the file and downloading the setting data to the unit gain, the
logging operation can be performed under the same conditions.
To Next Page
Loading...
