4.2 Registration in I/O Map
4-3
4.2 Registration in I/O Map
4.2.1 Creation of I/O Map
Before setting parameters or creating programs, register units to be used in the I/O map. The
I/O map is created on FPWIN GR7. The following procedure is explained on the condition that
FPWIN GR7 has already started.
1. Select "Options" > "FP7 Configuration" > "I/O map" in the menu bar.
The "I/O map" dialog box is displayed.
2. Double-click a desired slot.
The unit selection dialog box is displayed.
3. Select "Motion control" for "Unit type" and select the unit name used, and
press the "OK" button.
The selected unit is registered in the I/O map.
4. Confirm the I/O map, and press the "OK" button.
The unit selection dialog box is displayed.
To Next Page
Loading...
