4.4 Setting of Network Configuration
4-17
4.4.4 Download to FP7 MC Unit
Check the configuration of devices connected to the network, and download setting
information to FP7 MC Unit after finishing the setting of station addresses and axis numbers.
The following procedure is explained on the condition that CMI has already started.
1. Select "File" > "Download to Unit" from the menu bar.
A message confirming the target unit is displayed.
2. Confirm the message, and press the [Yes] button.
When the CPU is in RUN mode, the following message is displayed.
3. Select a unit to which the setting data is downloaded, and press the "Yes"
button.
A message confirming whether to execute the writing to FROM is displayed.
To Next Page
Loading...
