Panasonic AFP7MC16EC - 10.3 Setting and Operation of JOG Inching Operation

Manual Operation
(JOG Operation)
10-8
10.3 Setting and Operation of JOG Inching Operation
In this example, a forward or reverse operation is performed in the JOG operation by the
inching operation.
Table
Forward JOGReverse JOG
Ball screw
(-) side (+) side
 Settings
Item Setting example
Acceleration/deceleration pattern 0: Linear acceleration/deceleration
Acceleration time (ms) 100 ms
Deceleration time (ms) 100 ms
Target speed 10000 pps
JOG inching movement amount 10000 pulses
 Operation diagram
100
100
f [pps]
10000
100
100
t [ms]
20000 30000
40000
Operation done flag
Current value
BUSY flag
JOG inching
operation request
JOG operation
forward/reverse request
KEY POINTS
• The inching operation starts at the leading edge of the JOG forward/reverse
request. Also, when the request signal is short, it operates until the pulse
set for "inching movement" is output.