14.3 Trigger Condition Setting
14-11
"Trigger Setting" dialog box
①
Setting object The trigger for the setting is displayed.
②
Comparison
condition
Select comparison conditions to enable the trigger.
↑
It will be valid when the leading edge (off to on) of the "condition set for
Comparison source" is detected.
↓
It will be valid when the trailing edge (on to off) of the "condition set for
Comparison source" is detected.
↑↓
It will be valid when the leading edge (off to on) or trailing edge (on to
off) of the "condition set for Comparison source" is detected.
=
It will be valid when "condition set for Comparison source" is equal to
"condition set for Comparison destination".
< >
It will be valid when "condition set for Comparison source" is not equal to
"condition set for Comparison destination".
≧
It will be valid when "condition set for Comparison source" is larger than
or equal to "condition set for Comparison destination".
≦
It will be valid when "condition set for Comparison source" is smaller
than or equal to "condition set for Comparison destination".
③
Comparison
source
Select devices for the comparison conditions. A fixed value can be selected for
Comparison source.
④
Comparison
destination
①
②
③
④
To Next Page
Loading...
