Panasonic AFP7MC16EC

Supplementary Functions
13-12
 Errors and Warnings
[Monitor value error setting (UM0325C): 0x1 (Error annunciation)]
Axis operation error [From 00F0 3000H]
●: Recoverable, -: Unrecoverable
Error
code
Error name Description Object Recovered Countermeasures
3050H
Torque
judgment
error
The torque value exceeds the
setting torque monitor
judgement value.
Each
axis

- Design the system within the
range that the torque of the
motor does not exceed the
judgment value.
- Check the torque monitor
judgment value.
(Note): To simplify the displays, only the lower four digits (Hex) of each error code are displayed in the above table.
[Monitor value error setting (UM0325C): 0x3 (Warning annunciation)]
Unit warning [From 00B0 0000H]
●: Recoverable, -: Unrecoverable
Warning
code
Name Description Object Recovered Countermeasures
0050H
Torque
judgment
warning
The torque value exceeds the
setting torque monitor
judgement value.
Each
axis

- Design the system within the
range that the torque of the
motor does not exceed the
judgment value.
- Check the torque monitor
judgment value.