14.2 Registration of Devices
14-5
Setting items (When Object is MC Unit)
Trigger no. Select a trigger number corresponding to the monitored device. Range: 1 to 16
Object MC Unit
Classification
Select one from eleven classification items of unit memory configuration.
All / Input control area / Output control area / Each axis information & monitor area /
IO area / Operation speed rate setting area / Torque limit area / Error annunciation
& clear area / Warning annunciation & clear area / Synchronous control monitor
area / Each axis setting parameter area
Device Select a device available for the item selected in Classification.
Axis number Select a target axis number.
Device Type
When a device and axis number is selected, these items will be automatically set.
When one bit in a word device is specified, the used bit position is displayed.
Used bit position
Color
Select a display color on the time chart monitor. Double-clicking it will open the
“Color" editor.
Setting items (When Object is Slave)
Item Description
Trigger no. Select a trigger number corresponding to the monitored device. Range: 1 to 16
Object Slave
Node address Set the station address (node number) of the slave device.
Main Index
Set the index, sub index and data type of the slave.
Sub Index
Device Type
Used bit position When specifying "Bit device" in the word device, set the used bit position.
Color
Select a display color on the time chart monitor. Double-clicking it will open the
"Color" editor.
• The device displayed on the time chart is specified along with trigger
conditions (1 to 16).
• Switching the object between "MC Unit" and "Slave" in the "Register
Device" dialog box switches the selectable items.
To Next Page
Loading...
