4.4 Setting of Network Configuration
4-11
3. Select “Append Slave” from the context menu.
The dialog box for selecting slaves is displayed.
4. Select slaves (servo amplifier form) to be used from the list.
5. Input the number of slaves, and press the [OK] button.
The registration state of the slaves (A6B/A5B) connected to FP7 MC Unit is
displayed in the project explorer. The list shows the slaves in the connection order
from the unit connected to FP7 MC Unit first.
6. When there are multiple types of slaves (servo amplifier form), repeat steps
2 to 5.
To Next Page
Loading...
