5.1 FP7 MC Unit Common Settings
5-5
Debug function
EC packet monitor
request flag setting
Disabled
The operation of packet monitor request flag of EC(EtherCAT)
communication is set.
Disabled Packet monitor is not executed when EC packet
monitor request flag turns on.
Enabled Packet monitor is executed when EC packet monitor
request flag turns on.
Execute EC Packet
Monitor after Power ON
Not executed
The operation of the EC (EtherCAT) packet monitor when FP7 MC
Unit is powered on is set.
Not executed
EC packet monitoring is not executed after the
power turns on.
Executed
EC packet monitoring is executed after the power
turns on.
• For details of "EC packet monitor" function, refer to "13.13 EC Packet
Monitor Function".
To Next Page
Loading...
