Mixer : Mixer Pages
10 - 216
Collapse Versus Hide
Choosing Collapse leaves a small artefact of the mixer area visible, a gray horizontal bar with a + box at the right-
hand side which restores. Hide completely removes the area from view. Choosing Show All in the Mixer + - pop-
up will restore.
Resets
These context menus also provide a convenient way to restore all controls of specific types or, in the relevant sec-
tions, the entire Strip or Mixer to the default condition.
Bus + - Pop-up Menus
Collapse Collapses the Bus Send row.
Hide Hides the Bus Send row.
Change Color Opens the Color Picker window.
Reset Color Resets Color to the default.
Reset Bus Turns Bus Off.. In an Aux Bus reduces the send level to -144.5dB and turns Bus Off.
Note: Aux Buses set to Pre-fader are NOT affected.
Reset Channel Routing As it says.
All On Turns On the Strip sends to the bus for every Input Strip.
All Off Turns Off the Strip sends to the bus for every Input Strip.
All Pre Aux only All sends are switched to Pre Fader.
All Post Aux only All sends are switched to Post Fader.
All to Channel Router All sends are set to Channel Router Matrix.
All to Panner All sends are set to the Panning Bus (One entry will be present per Panning Bus in
the mixer.)
Panning Pop-up Menu
Collapse Collapses the Panner row.
Hide Hides the Panner row.
Reset Bus Resets the bus to the default condition.
All Panners to None Removes the Panner from all Input Strips and leaves a thin placeholder row.
All Panners to Pan/Balance Sets every Input Strip Panner to Pan for Mono Strips, Balance for Stereo Strips and
Pan for multi-channel Strips.
All Panners to Surround Panner Sets every Input Strip Panner to Surround mode.
All Panners to 3D Panner Sets every Input Strip Panner to 3D mode.
Effect Pop-up Menu
Collapse Collapses the Effects row.
Hide Hides the Effects row.
Reset Bus Nothing.
All Effects On Turns all Effects in the Mixer On.
All Effects Off Turns all Effects in the Mixer Off.
All Effects Bypass Switches all Effects in the Mixer to Bypass.
All Effects Unbypass Switches all Effects in the Mixer to in circuit.
All VS3 Effects On Turns all VS3 Effects in the Mixer On.
All VS3 Effects Off Turns all VS3 Effects in the Mixer Off.
All VS3 Effects Bypass Switches all VS3 Effects in the Mixer to Bypass.
All VS3 Effects Unbypass Switches all VS3 Effects in the Mixer to in circuit.
All VST Effects On Turns all VS3 Effects in the Mixer On.
All VST Effects Off Turns all VS3 Effects in the Mixer Off.
To Next Page
Loading...