Mixer : Horus/Hapi Preamp Remote Controls
10 - 242
VST
As the image above shows, the options are similar for VST Plug-Ins
Add Accesses the Plug-Ins list to add a further Plug-In to the Strip
Remove Accesses a list of all Plug-Ins currently instantiated in the strip. You can select any
of them for removal.
Move “Effect Name” Up Moves the effect you right-clicked on Up the list.
Move “Effect Name” Down Moves the effect you right-clicked on Down the list.
Remove “Effect Name” Removes the Plug-In you right-clicked on.
External Insert
To add an External Insert simply right-click over the strip where the plug-in is to be added and choose: VS3 Effects
> Add > Other > External Insert
Clicking on the External Input name in the strip opens the External Insert Control Window.
Send and Return Connections can be made by clicking on the XLR icons and levels set with the knobs. When you
have determined the delay introduced by the I/O loop including the external effect the value in samples should be
entered in the Ext. Unit Delay field.
Mixer Strip External Insert Plug-in Control Window
To Next Page
Loading...