Appendices : Appendix III Optional Features
31 - 791
If the answer is NO the project will be opened in DXD Mixing mode with the DXD Mixer in the same configuration
as it was when the Project was Saved.
DSD Project
The DSD Project - can be used recording, editing and mastering DSD/SACD in DSD format (2.8 MHz - 1 bit) Project
for recording, editing and mastering DSD/SACD in DSD format (2.8 MHz - 1 bit
Opening a DSD Project
When an existing DSD Project is opened this dialog appears:)
Would you like to convert this DSD Project into a DXD Mixing Project ?
If the answer is YES the project will be opened in DXD Mixing mode. (Though all your media files will remain in
DSD IFF format)
If the answer is NO the project will be opened in DSD mode as it was when created.
Peak Values in DSD and DSDIFF Media Files
Peak Computations
For DXD audio media, the peak displayed in the media Properties page is computed from the audio without a
[20..20kHz] filter.
For DSD audio media (DSDIFF), the peak displayed in the media Properties page is computed from the audio after
a [20..20kHz] filter.
This could change the behavior of Auto-scale Waveform and Normalize.
For example:
A DXD file generated from a 1kHz sine @-10dB -> peak = -10dB
A DSDIFF file generated from a 1kHz sine @-10dB -> peak = -9.9dB
Convert DSD Project to DXD Mixing Project mode? dialog
To Next Page
Loading...