Rockwell Automation PowerFlex 7000 Technical Data

2-56 Parameter Descriptions
7000-TD002A-EN-P – September 2007
Control Feedback [Control Feedback]
Linear Number: 273
Minimum Value: 0.0 Hz
Maximum Value: 6553.5 Hz
Access Level: Basic
Read/Write: Read Only
This parameter specifies the actual control reference feedback value measured by the drive.
Speed Command Potentiometer [SpdCmd Pot]
Linear Number: 47
Minimum Value: -120.0 Hz
Maximum Value: 120.0 Hz
Access Level: Basic
Read/Write: Read Only
This parameter displays the speed command value in Hz from the speed potentiometer.
Speed Command Analog Input 1 [SpdCmd Anlg Inp1]
Linear Number: 48
Minimum Value: -120.0 Hz
Maximum Value: 120.0 Hz
Access Level: Basic
Read/Write: Read Only
This parameter displays the speed command value in Hz from Analog Input 1.
Speed Command Analog Input 2 [SpdCmd Anlg Inp2]
Linear Number: 56
Minimum Value: -120.0 Hz
Maximum Value: 120.0 Hz
Access Level: Basic
Read/Write: Read Only
This parameter displays the speed command value in Hz from Analog Input 2.
Speed Command DPI [SpdCmd DPI]
Linear Number: 58
Minimum Value: -120.0 Hz
Maximum Value: 120.0 Hz
Access Level: Basic
Read/Write: Read Only
This parameter displays the value of the speed command in Hz coming from the DPI adapter.
Speed Command PID [SpdCmd PID]
Linear Number: 59
Minimum Value: -120.0 Hz
Maximum Value: 120.0 Hz
Access Level: Basic
Read/Write: Read Only
This parameter displays value of the speed command in Hz coming from the process controller (PID) in
the drive.

Rockwell Automation PowerFlex 7000 Specifications

General

Brand	Rockwell Automation
Model	PowerFlex 7000
Category	DC Drives
Language	English