Parameter Descriptions 2-131
7000-TD002A-EN-P – September 2007
Reference Command Mask [Ref Cmd Mask]
Linear Number: 248
Default Value: 11111111
Access Level: Basic
Read/Write: Read/Write
This parameter specifies which adapters can issue the reference command. A one represents the
adapter that can issue the reference command, a zero represents an adapter that cannot issue the
reference command. There are 8 adapters available, from Adapter0 to Adapter7.
Bit Enum Text Description
0 Adapter 0 Host
1 Adapter 1
2 Adapter 2
3 Adapter 3 (Currently unused)
4 Adapter 4 (Currently unused)
5 Adapter 5
6 Adapter 6 (Currently unused)
7 Adapter 7 Programming Terminal
Fault Reset Command Mask [Reset Mask]
Linear Number: 247
Default Value: 11111111
Access Level: Basic
Read/Write: Read/Write
This parameter specifies which adapters can issue the reset command. A one represents the adapter
that can issue the reset command, a zero represents an adapter that cannot issue the reset command.
There are 8 adapters available, from Adapter0 to Adapter7.
Bit Enum Text Description
0 Adapter 0 Host
1 Adapter 1
2 Adapter 2
3 Adapter 3 (Currently unused)
4 Adapter 4 (Currently unused)
5 Adapter 5
6 Adapter 6 (Currently unused)
7 Adapter 7 (Currently unused)
To Next Page
Loading...
