Rockwell Automation PowerFlex 7000

Parameter Descriptions 2-59
7000-TD002A-EN-P – September 2007
Preset Jog Speed [Preset Jog Speed]
Linear Number: 40
Default Value: 6.0 Hz
Minimum Value: 1.0 Hz
Maximum Value: 60.0 Hz
Access Level: Basic
Read/Write: Read/Write
This parameter specifies the preset jog speed command, which is selected by the parameter Speed Ref
Select (7).
Preset Speed 1 [Preset Speed 1]
Linear Number: 33
Default Value: 30.0 Hz
Minimum Value: 0.5 Hz
Maximum Value: 75.0 Hz
Access Level: Advanced
Read/Write: Read/Write
This parameter specifies the preset speed 1 command which is selected by the parameter Speed Ref
Select (7).
Preset Speed 2 [Preset Speed 2]
Linear Number: 34
Default Value: 35.0 Hz
Minimum Value: 0.5 Hz
Maximum Value: 75.0 Hz
Access Level: Advanced
Read/Write: Read/Write
This parameter specifies the preset speed 2 command which is selected by the parameter Speed Ref
Select (7).
Preset Speed 3 [Preset Speed 3]
Linear Number: 35
Default Value: 40.0 Hz
Minimum Value: 0.5 Hz
Maximum Value: 75.0 Hz
Access Level: Advanced
Read/Write: Read/Write
This parameter specifies the preset speed 3 command which is selected by the parameter Speed Ref
Select (7).