Parameter Descriptions 2-167
7000-TD002A-EN-P – September 2007
Control AC#3 RMS [Control AC#3 RMS]
Linear Number: 79
Minimum Value: 0.0 V
Maximum Value: 300.0 V
Access Level: Advanced
Read/Write: Read Only
This parameter displays the measured RMS value of the control voltage applied to AC/DC Power
Supply#3 in a multi power supply system.
Control AC#4 RMS [Control AC#4 RMS]
Linear Number: 92
Minimum Value: 0.0 V
Maximum Value: 300.0 V
Access Level: Advanced
Read/Write: Read Only
This parameter displays the measured RMS value of the control voltage applied to AC/DC Power
Supply#4 in a multi power supply system.
Control Power 56V [Control 56V]
Linear Number: 121
Minimum Value: 0.0 V
Maximum Value: 72.0 V
Access Level: Advanced
Read/Write: Read Only
This parameter displays the measured value of the 56V output from the AC/DC power supply feeding the
DC/DC converter.
Control Power 5V [Control 5V]
Linear Number: 139
Minimum Value: 0.0 V
Maximum Value: 8.0 V
Access Level: Advanced
Read/Write: Read Only
This parameter displays the measured value of the 5V output from the DC/DC converter to the Drive
Processor Module (DPM).
Control Power 15V [Control 15V]
Linear Number: 142
Minimum Value: 0.0 V
Maximum Value: 24.0 V
Access Level: Advanced
Read/Write: Read Only
This parameter displays the 15V DC output from the DC/DC converter to the Analog Control Board
(ACB).
To Next Page
Loading...
Need help?
General
