Rockwell Automation PowerFlex 7000 Technical Data

2-138 Parameter Descriptions
7000-TD002A-EN-P – September 2007
Datalinks Parameters
PLC Error Flags [PLC Error Flags]
Linear Number: 376
Access Level: Basic
Read/Write: Read Only
This parameter specifies the PLC Remote I/O error flags. A zero represents no error, a one represents an
error.
A link range will be indicated when the corresponding parameter is out of range. A link error will be
indicated if the corresponding cannot be made, or if an attempt is made to modify a parameter that is
read only, or cannot be modified while the drive is running.
Bit Enum Text Description
0 LinkA1 Range LinkA1 Range
1 LinkA2 Range LinkA2 Range
2 LinkB1 Range LinkB1 Range
3 LinkB2 Range LinkB2 Range
4 LinkC1 Range LinkC1 Range
5 LinkC2 Range LinkC2 Range
6 LinkD1 Range LinkD1 Range
7 LinkD2 Range LinkD2 Range
8 LinkA1 Error LinkA1 Error
9 LinkA2 Error LinkA2 Error
10 LinkB1 Error LinkB1 Error
11 LinkB2 Error LinkB2 Error
12 LinkC1 Error LinkC1 Error
13 LinkC2 Error LinkC2 Error
14 LinkD1 Error LinkD1 Error
15 LinkD2 Error LinkD2 Error
PLC Input Link A1 [PLC Inp Link A1]
Linear Number: 529
Default Value: 0
Minimum Value: 0
Maximum Value: 779
Access Level: Basic
Read/Write: Read/Write
This parameter specifies the linear number of the parameter associated with PLC input link A1.
PLC Input Link A2 [PLC Inp Link A2]
Linear Number: 530
Default Value: 0
Minimum Value: 0
Maximum Value: 779
Access Level: Basic
Read/Write: Read/Write
This parameter specifies the linear number of the parameter associated with PLC input link A2.

Rockwell Automation PowerFlex 7000 Specifications

General

Brand	Rockwell Automation
Model	PowerFlex 7000
Category	DC Drives
Language	English