Rockwell Automation PowerFlex 7000 Technical Data

Parameter Descriptions 2-49
7000-TD002A-EN-P – September 2007
Autotune Complete [AutotuneComplete]
Linear Number: 375
Default Value: 0000000000000000
Access Level: Service
Read/Write: Read/Write
This parameter indicates the completion of the following auto-tune functions selected by the parameter
Autotune Select:
Bit Enum Text Description
0 Rectifier Rectifier Tuning
1 Mtr Impednce Motor Impedance
2 FluxSpeedReg Flux Speed Regulator
3 SyncFieldReg Synchronous Field Regulator 
4 Unused
5 Unused
6 Unused
7 Unused
8 Unused
9 Unused
10 Unused
11 Unused
12 Unused
13 Unused
14 Unused
15 Unused
 Contact factory for availability
Motor Model Parameters
Stator Current [Stator Current]
Linear Number: 340
Minimum Value: 0.000 pu
Maximum Value: 4.000 pu
Access Level: Monitor
Read/Write: Read Only
This parameter is the calculated stator current magnitude. This is a parameter for display purposes.
Stator Voltage [Stator Voltage]
Linear Number: 344
Minimum Value: 0.000 pu
Maximum Value: 2.000 pu
Access Level: Monitor
Read/Write: Read Only
This parameter is the calculated stator voltage magnitude. It varies with both speed and torque, and if
the flux command is set correctly, should be about 1.0 pu at rated speed and rated load. The stator
voltage may be less than 1.0 pu at rated speed if the load torque is less than rated or the line voltage is
low.

Rockwell Automation PowerFlex 7000 Specifications

General

Brand	Rockwell Automation
Model	PowerFlex 7000
Category	DC Drives
Language	English