Parameter Descriptions 2-165
7000-TD002A-EN-P – September 2007
Motor Power [Motor Power]
Linear Number: 364
Minimum Value: -15000 kW
Maximum Value: 15000 kW
Access Level: Basic
Read/Write: Read Only
This parameter is the measured motor output power in kW. It is used by the programming terminal and
can also be assigned to analog output to drive an optional analog meter.
Line Current [Line Current]
Linear Number: 500
Minimum Value: 0 A
Maximum Value: 999 A
Access Level: Basic
Read/Write: Read Only
This parameter displays the measured input line current in Amperes.
Line Voltage [Line Voltage]
Linear Number: 324
Minimum Value: 0 V
Maximum Value: 8000 V
Access Level: Basic
Read/Write: Read Only
This parameter displays the measured input line voltage in Volts.
Line Frequency [Line Frequency]
Linear Number: 657
Minimum Value: -100.0 Hz
Maximum Value: 100.0 Hz
Access Level: Basic
Read/Write: Read Only
This parameter displays the frequency of the line voltage. This parameter is a filtered version of Master
Line Freq (334) in the Feedback group.
Input Power [Input Power]
Linear Number: 753
Minimum Value: -15000 kW
Maximum Value: 15000 kW
Access Level: Service
Read/Write: Read Only
This parameter in the Metering group displays the real power consumption by the drive. The
measurement includes the line-reactor or transformer losses.
To Next Page
Loading...
Need help?
General
