To Next Page

To Previous Page

Parameter Descriptions 2-133

7000-TD002A-EN-P – September 2007

Forced Fault Mask [Forced Flt Mask]

Linear Number: 638

Default Value: 11111111

Access Level: Basic

Read/Write: Read/Write

This parameter specifies which adapters can issue a forced fault. A one represents the adapter that can

issue the forced fault, a zero represents an adapter that cannot issue the forced fault. There are 8

adapters available, from Adapter0 to Adapter7.

Bit Enum Text Description

0 Adapter 0 Host

1 Adapter 1

2 Adapter 2

3 Adapter 3 (Currently unused)

4 Adapter 4 (Currently unused)

5 Adapter 5

6 Adapter 6 (Currently unused)

7 Adapter 7 (Currently unused)

Profile Mask [Profile Mask]

Linear Number: 36

Default Value: 11111111

Access Level: Basic

Read/Write: Read/Write

This parameter specifies which adapters can issue the Acceleration/Deceleration Profile command. The

adapter can select either Ramp or S-Curve profiles. A one represents an adapter that has control over

the Profile, and a zero represents an adapter that does not have control over the Profile. There are 8

adapters available, from Adapter 0 to Adapter 7.