Rockwell Automation PowerFlex 7000

2-172 Parameter Descriptions
7000-TD002A-EN-P – September 2007
Rectifier Device Gating Sequence C [Rec DvcGat SeqnC]
Linear Number: 626
Minimum Value: 0
Maximum Value: 65535
Access Level: Service
Read/Write: Read Only
This parameter specifies the device firing sequence on Fiber Optic Interface Board C on the rectifier side.
Rectifier Device Diagnostic Feedback A [Rec DvcDiag FbkA]
Linear Number: 627
Minimum Value: 0
Maximum Value: 65535
Access Level: Service
Read/Write: Read Only
This parameter displays the diagnostic feedback from Fiber Optic Interface Board A on the rectifier side.
Rectifier Device Diagnostic Feedback B [Rec DvcDiag FbkB]
Linear Number: 628
Minimum Value: 0
Maximum Value: 65535
Access Level: Service
Read/Write: Read Only
This parameter displays the diagnostic feedback from Fiber Optic Interface Board B on the rectifier side.
Rectifier Device Diagnostic Feedback C [Rec DvcDiag FbkC]
Linear Number: 629
Minimum Value: 0
Maximum Value: 65535
Access Level: Service
Read/Write: Read Only
This parameter displays the diagnostic feedback from Fiber Optic Interface Board C on the rectifier side.
Inverter Device Gating Sequence [Inv DvcGat Seqn]
Linear Number: 584
Minimum Value: 0
Maximum Value: 65535
Access Level: Service
Read/Write: Read Only
This parameter specifies the device firing sequence on the inverter side. With a drive with more than one
series device, the same firing sequence is applied to all the fiber optic boards.
Inverter Device Diagnostic Feedback A [Inv DvcDiag FbkA]
Linear Number: 608
Minimum Value: 0
Maximum Value: 65535
Access Level: Service
Read/Write: Read Only
This parameter displays the diagnostic feedback from Fiber Optic Interface Board A on the inverter side.