Rockwell Automation PowerFlex 7000 Technical Data

Parameter Descriptions 2-97
7000-TD002A-EN-P – September 2007
Standard XIO Warning [Stnd XIO Warning]
Linear Number: 434
Access Level: Service
Read/Write: Read Only
This parameter specifies those inputs on the standard XIO card, which have been configured as
warnings. A ‘1’ represents an active warning as follows:
Bit Enum Text Description
0 Input Protn1 Input Protection 1 warning
1 TxReacOvrTmp Isolation Transformer/Line Reactor Overtemperature warning
2 DCLinkOvrTmp DC Link / Common-Mode Choke Overtemperature warning
3 Motor Protn Motor Protection warning
4 Input Protn2 Input Protection 2 warning
5 Aux Protn Auxiliary Protection warning
6 Unused
7 Unused
External Fault XIO [External Fault]
Linear Number: 372
Access Level: Service
Read/Write: Read Only
This parameter specifies those inputs on the optional XIO card, which have been configured as faults
(Class1 or Class2). A ‘1’ indicates an active fault on the card. There are a total of 16 external faults from
External1 to External16. The user can modify the text associated with each fault.
Bit Enum Text Description
0 External1 External Fault 1
1 External2 External Fault 2
2 External3 External Fault 3
3 External4 External Fault 4
4 External5 External Fault 5
5 External6 External Fault 6
6 External7 External Fault 7
7 External8 External Fault 8
8 External9 External Fault 9
9 External10 External Fault 10
10 External11 External Fault 11
11 External12 External Fault 12
12 External13 External Fault 13
13 External14 External Fault 14
14 External15 External Fault 15
15 External16 External Fault 16

Rockwell Automation PowerFlex 7000 Specifications

General

Brand	Rockwell Automation
Model	PowerFlex 7000
Category	DC Drives
Language	English