Parameter Descriptions 2-173
7000-TD002A-EN-P – September 2007
Inverter Device Diagnostic Feedback B [Inv DvcDiag FbkB]
Linear Number: 609
Minimum Value: 0
Maximum Value: 65535
Access Level: Service
Read/Write: Read Only
This parameter displays the diagnostic feedback from Fiber Optic Interface Board B on the inverter side.
Inverter Device Diagnostic Feedback C [Inv DvcDiag FbkC]
Linear Number: 618
Minimum Value: 0
Maximum Value: 65535
Access Level: Service
Read/Write: Read Only
This parameter displays the diagnostic feedback from Fiber Optic Interface Board C on the inverter side.
Power Factor Compensation Modulation Index [PFC Mod Index]
Linear Number: 311
Minimum Value: 0.00
Maximum Value: 1.50
Access Level: Service
Read/Write: Read Only
This parameter displays the value of modulation index at which the inverter is operating while
compensating for the line power factor. The value can change from 0.2 to 0.98 when drive is operating
with Space Vector Modulation technique and is set to 1.03 when the drive uses Selective Harmonic
Elimination technique.
Contact factory for the availability of the feature in the drive
Liquid Cooling Parameters
Coolant Temperature C [Coolant Temp C]
Linear Number: 380
Minimum Value: 0 C
Maximum Value: 65535 C
Access Level: Service
Read/Write: Read Only
This parameter specifies the coolant temperature in Degree Celsius on a PowerFlex 7000 Liquid-Cooled
drive.
Coolant Temperature F [Coolant Temp F]
Linear Number: 381
Minimum Value: 0 F
Maximum Value: 65535 F
Access Level: Service
Read/Write: Read Only
This parameter specifies the coolant temperature in Fahrenheit on a PowerFlex 7000 Liquid-Cooled
drive.
To Next Page
Loading...
Need help?
General
