Rockwell Automation PowerFlex 7000 Technical Data

Parameter Descriptions 2-143
7000-TD002A-EN-P – September 2007
Speed Pot Maximum Voltage [Speed Pot Vmax]
Linear Number: 631
Default Value: 10.00 V
Minimum Value: -10.00 V
Maximum Value: 10.00 V
Access Level: Service
Read/Write: Read/Write when Stopped
This parameter specifies the maximum output voltage from the speed potentiometer and is used for
calibrating the speed command.
Analog Input1 Minimum Voltage [Anlg Inp1 Vmin]
Linear Number: 632
Default Value: 0.00 V
Minimum Value: -10.00 V
Maximum Value: 10.00 V
Access Level: Service
Read/Write: Read/Write when Stopped
This parameter specifies the minimum voltage which can be used on Analog Input 1 and is used for
calibrating the speed command.
Analog Input1 Maximum Voltage [Anlg Inp1 Vmax]
Linear Number: 633
Default Value: 10.00 V
Minimum Value: -10.00 V
Maximum Value: 10.00 V
Access Level: Service
Read/Write: Read/Write when Stopped
This parameter specifies the maximum voltage which can be used on Analog Input 1 and is used for
calibrating the speed command.
Analog Input2 Minimum Voltage [Anlg Inp2 Vmin]
Linear Number: 634
Default Value: 0.00 V
Minimum Value: -10.00 V
Maximum Value: 10.00 V
Access Level: Service
Read/Write: Read/Write when Stopped
This parameter specifies the minimum voltage which can be used on Analog Input 2 and is used for
calibrating the speed command.
Analog Input2 Maximum Voltage [Angl Inp2 Vmax]
Linear Number: 635
Default Value: 10.00 V
Minimum Value: -10.00 V
Maximum Value: 10.00 V
Access Level: Service
Read/Write: Read/Write when Stopped
This parameter specifies the maximum voltage which can be used on Analog Input 2 and is used for
calibrating the speed command.

Rockwell Automation PowerFlex 7000 Specifications

General

Brand	Rockwell Automation
Model	PowerFlex 7000
Category	DC Drives
Language	English