Rockwell Automation PowerFlex 7000 Technical Data

2-58 Parameter Descriptions
7000-TD002A-EN-P – September 2007
Reference Command Analog Input Min [RefCmdAnlgInpMin]
Linear Number: 43
Default Value: 6.0 Hz
Minimum Value: -120.0 Hz
Maximum Value: 120.0 Hz
Access Level: Basic
Read/Write: Read/Write
This parameter specifies the minimum value of speed command in Hz that could come from Analog Input
1 or Analog Input 2. Along with RefCmdAnlgInpMax (44) this parameter is used in determining the slope
for interpolating the speed command coming from Analog Inputs.
Reference Command Analog Input Max [RefCmdAnlgInpMax]
Linear Number: 44
Default Value: 60.0 Hz
Minimum Value: 0.0 Hz
Maximum Value: 120.0 Hz
Access Level: Basic
Read/Write: Read/Write
This parameter specifies the maximum value of speed command in Hz that could come from Analog Input
1 or Analog Input 2. Along with RefCmdAnlgInpMin (43) this parameter is used in determining the slope
for interpolating the speed command coming from Analog Inputs.
Reference Command DPI Min [RefCmd DPI Min]
Linear Number: 45
Default Value: 6.0 Hz
Minimum Value: 0.0 Hz
Maximum Value: 120.0 Hz
Access Level: Basic
Read/Write: Read/Write
This parameter specifies the minimum value of speed command in Hz that could come from the DPI
adapter. Along with RefCmd DPIMax (46) this parameter is used in determining the slope for interpolating
the digital speed command.
Reference Command DPI Max [RefCmd DPI Max]
Linear Number: 46
Default Value: 60.0 Hz
Minimum Value: 0.0 Hz
Maximum Value: 120.0 Hz
Access Level: Basic
Read/Write: Read/Write
This parameter specifies the maximum value of speed command in Hz that could come from the DPI
adapter. Along with RefCmd DPIMin (45) this parameter is used to in determining the slope for
interpolating the digital speed command.

Rockwell Automation PowerFlex 7000 Specifications

General

Brand	Rockwell Automation
Model	PowerFlex 7000
Category	DC Drives
Language	English