To Next Page

To Previous Page

2-134 Parameter Descriptions

7000-TD002A-EN-P – September 2007

Owners Parameters

Direction Command Owner [Direction Owner]

Linear Number: 388

Access Level: Monitor

Read/Write: Read Only

This parameter specifies which adapters are issuing the direction command. A one represents the

adapter that is issuing the direction command, a zero represents an adapter that is not issuing the

direction command. There are 8 adapters available, from Adapter0 to Adapter7.

Bit Enum Text Description

0 Adapter 0 Host

1 Adapter 1

2 Adapter 2

3 Adapter 3 (Currently unused)

4 Adapter 4 (Currently unused)

5 Adapter 5

6 Adapter 6 (Currently unused)

7 Adapter 7 (Currently unused)

Jog Command Owner [Jog Owner]

Linear Number: 389

Access Level: Monitor

Read/Write: Read Only

This parameter specifies which adapters are issuing the jog command. A one represents the adapter that

is issuing the jog command, a zero represents an adapter that is not issuing the jog command. There are

8 adapters available, from Adapter0 to Adapter7.