Rockwell Automation PowerFlex 7000 - SGCT - SPS Board

Parameter Descriptions 2-147
7000-TD002A-EN-P – September 2007
Analog Meter 3 Scale [AnlgMeter3 Scale]
Linear Number: 523
Default Value: 1.00
Minimum Value: 0.00
Maximum Value: 655.35
Access Level: Basic
Read/Write: Read/Write
This parameter specifies the scale to be used for Analog Meter 3 parameter.
Analog Meter 4 Scale [AnlgMeter4 Scale]
Linear Number: 524
Default Value: 1.00
Minimum Value: 0.00
Maximum Value: 655.35
Access Level: Basic
Read/Write: Read/Write
This parameter specifies the scale to be used for Analog Meter 4 parameter.
Analog Output 1 Scale [Anlg Out1 Scale]
Linear Number: 183
Default Value: 1.00
Minimum Value: 0.00
Maximum Value: 655.35
Access Level: Basic
Read/Write: Read/Write
This parameter specifies the scale to be used for ACB Port 1 parameter.
Analog Output 2 Scale [Anlg Out2 Scale]
Linear Number: 184
Default Value: 1.00
Minimum Value: 0.00
Maximum Value: 655.35
Access Level: Basic
Read/Write: Read/Write
This parameter specifies the scale to be used for ACB Port 2 parameter.
Analog Output 3 Scale [Anlg Out3 Scale]
Linear Number: 187
Default Value: 1.00
Minimum Value: 0.00
Maximum Value: 655.35
Access Level: Basic
Read/Write: Read/Write
This parameter specifies the scale to be used for ACB Port 3 parameter.