Quick Start
R&S
®
FSVA/FSV
147Operating Manual 1176.7510.02 ─ 09
b) Press the SPAN key and enter "100 MHz".
Figure 2-28: Sine wave signal with low S/N ratio. The signal is measured with the auto peak
detector and is completely hidden in the intrinsic noise of the R&S
FSVA/FSV.
3. To suppress noise spikes the trace can be averaged.
a) Press the TRACE key.
b) Press the "Trace Wizard" softkey.
The Trace Wizard dialog box opens.
Advanced Measurement Examples
To Next Page
Loading...
